TAD-based

PRESCRIPTION FORM

in collaboration with

The combination of TADs/mini-implants and RME can result in direct skeletal expansion effects (even in mature adolescents and young adults). When combined with Infinitas Mini implants, the digital workflow and precise 3D printed RME appliance means that a single appointment protocol (of both the expander and the mini-implants) can be easily adopted.

Following receipt of the scan there will be a digital validation of mini-implant location and appliance design between technician and clinician. The TAD based RME appliance and stent (if being used) will be despatched within 5 days of approval.

Infinitas based RME clinical protocol:

• Adhesion of the RME using GIC light cure band cement

• Infinitas stent fit over the RME appliance

• Infinitas mini-implant insertion through the RME eyelets

*Please note we are able to offer TAD based RME for many TAD systems, please contact us for further information.

Molar Protraction Appliance

TAD’s are placed in the palate to provide stable anchorage, allowing for controlled molar movement without unwanted side effects.

The appliance is delivered seamlessly within a precision-guided stent, for an efficient and clinician friendly workflow.

DB MESIALISER

Digitally designed for optimal fit, the DB Mesialiser features a low-profile framework that sits flush against the palate, ensuring patient comfort and appliance stability.

Compatible with the Infinitas single-visit protocol, the appliance is delivered with either yellow (6 mm) or green (9 mm) Infinitas implants for secure and efficient anchorage.

Activation is achieved using powerchain or NiTi springs between the integrated hooks.

DB DISTALISER

The DB Distaliser is designed for controlled distal movement and is available for research and development cases.

This appliance builds on live clinical use alongside the DB Mesialiser, with technician input required to ‘ready’ the device prior to fitting.

Available in either titanium or chrome cobalt, material selection supports varying clinical preferences and case requirements.

infinitas stent

Our Infinitas Stent service provides a clear guide for placing an implant. The stent baseplate fits to the teeth and palate to anchor the stent to the correct position.

The guide cylinder fits the insertion instruments and provides both a guide to avoid directional variation and gives a steady and stable insertion point, avoiding slippage. The stent is perfect for use with the Infinitas Mini Implant system.

Please send: upper and/or lower STL files, impressions, or models.

If sending a model, please either mark the model to indicate the position of the implant or please send the model with the mini-implant analogue and abutments fitted. Alternatively, if we receive impressions or digital scans, we can arrange a quick video call with the clinician to finalise the position of the implant.

Turnaround time: 3 working days

in collaboration with

Leone UNI-Lateral DISTALISER

Designed using Leone’s dedicated software, this appliance offers precise control for uni-lateral distalisation, guided by an integrated expansion screw. Leaf spring versions are also available to suit varying clinical protocols.

Distal movement is easily quantifiable, supporting treatment planning and progression.

Leone bi-Lateral distaliser

This bi-lateral appliance is digitally designed using Leone software and offers controlled distalisation via an integrated expansion screw. Leaf spring variants are also available, allowing flexibility in appliance mechanics.

TAD-based

in collaboration with

Following receipt of the scan there will be a digital validation of mini-implant location and appliance design between technician and clinician. The TAD based RME appliance and stent (if being used) will be despatched within 5 days of approval.

Infinitas based RME clinical protocol:

Molar Protraction Appliance

TAD’s are placed in the palate to provide stable anchorage, allowing for controlled molar movement without unwanted side effects.

The appliance is delivered seamlessly within a precision-guided stent, for an efficient and clinician friendly workflow.

DB MESIALISER

Digitally designed for optimal fit, the DB Mesialiser features a low-profile framework that sits flush against the palate, ensuring patient comfort and appliance stability.

Compatible with the Infinitas single-visit protocol, the appliance is delivered with either yellow (6 mm) or green (9 mm) Infinitas implants for secure and efficient anchorage.

Activation is achieved using powerchain or NiTi springs between the integrated hooks.

DB DISTALISER

The DB Distaliser is designed for controlled distal movement and is available for research and development cases.

This appliance builds on live clinical use alongside the DB Mesialiser, with technician input required to ‘ready’ the device prior to fitting.

Available in either titanium or chrome cobalt, material selection supports varying clinical preferences and case requirements.

infinitas stent

Our Infinitas Stent service provides a clear guide for placing an implant. The stent baseplate fits to the teeth and palate to anchor the stent to the correct position.

The guide cylinder fits the insertion instruments and provides both a guide to avoid directional variation and gives a steady and stable insertion point, avoiding slippage. The stent is perfect for use with the Infinitas Mini Implant system.

in collaboration with

Leone UNI-Lateral DISTALISER

Designed using Leone’s dedicated software, this appliance offers precise control for uni-lateral distalisation, guided by an integrated expansion screw. Leaf spring versions are also available to suit varying clinical protocols.

Distal movement is easily quantifiable, supporting treatment planning and progression.

Leone bi-Lateral distaliser

This bi-lateral appliance is digitally designed using Leone software and offers controlled distalisation via an integrated expansion screw. Leaf spring variants are also available, allowing flexibility in appliance mechanics.

The design allows for straightforward quantification of distal movement, supporting clinical monitoring throughout treatment.

Let’s chat

TAD-based

in collaboration with

Following receipt of the scan there will be a digital validation of mini-implant location and appliance design between technician and clinician. The TAD based RME appliance and stent (if being used) will be despatched within 5 days of approval.

Infinitas based RME clinical protocol:

Molar Protraction Appliance

TAD’s are placed in the palate to provide stable anchorage, allowing for controlled molar movement without unwanted side effects.

The appliance is delivered seamlessly within a precision-guided stent, for an efficient and clinician friendly workflow.

DB MESIALISER

Digitally designed for optimal fit, the DB Mesialiser features a low-profile framework that sits flush against the palate, ensuring patient comfort and appliance stability.

Compatible with the Infinitas single-visit protocol, the appliance is delivered with either yellow (6 mm) or green (9 mm) Infinitas implants for secure and efficient anchorage.

Activation is achieved using powerchain or NiTi springs between the integrated hooks.

DB DISTALISER

The DB Distaliser is designed for controlled distal movement and is available for research and development cases.

This appliance builds on live clinical use alongside the DB Mesialiser, with technician input required to ‘ready’ the device prior to fitting.

Available in either titanium or chrome cobalt, material selection supports varying clinical preferences and case requirements.

infinitas stent

Our Infinitas Stent service provides a clear guide for placing an implant. The stent baseplate fits to the teeth and palate to anchor the stent to the correct position.

The guide cylinder fits the insertion instruments and provides both a guide to avoid directional variation and gives a steady and stable insertion point, avoiding slippage. The stent is perfect for use with the Infinitas Mini Implant system.

in collaboration with

Leone UNI-Lateral DISTALISER

Designed using Leone’s dedicated software, this appliance offers precise control for uni-lateral distalisation, guided by an integrated expansion screw. Leaf spring versions are also available to suit varying clinical protocols.

Distal movement is easily quantifiable, supporting treatment planning and progression.

Leone bi-Lateral distaliser

This bi-lateral appliance is digitally designed using Leone software and offers controlled distalisation via an integrated expansion screw. Leaf spring variants are also available, allowing flexibility in appliance mechanics.

The design allows for straightforward quantification of distal movement, supporting clinical monitoring throughout treatment.

ORTHOGNATHIC

PRINT

Let’s chat

Compatible with the Infinitas single-visit protocol, the appliance is delivered with either yellow (6 mm) or green (9 mm) Infinitas implants for secure and efficient anchorage.